You can learn 3 useful solutions to deal with Acronis clone failed to read data from the disk. Both command line and a new bootable media can help you.
“I got the following error message when I cloned the disk with Acronis:
I've seen others in the forum here with this problem and it seems to be resolved as you would expect -- run chkdsk and fix the bad sectors. Unfortunately, that didn't seem to do anything for me: no bad sectors were found. SMART checks are ok. The disk seems to work fine otherwise.
The disk is an SSD. Does anyone have any advice?”
Acronis clone failed to read data from the disk can be in any area of the drive, and some areas are not touched by chkdsk. Since Aronis and Windows have different numbering order of disks. Acronis numbers drives begin with a 1, while Windows begin with a 0.
In addition to the disk number mismatch as the user case mentioned above, bad sectors on the disk also cause Acronis clone failed to read data from the disk. If you meet the second situation, you can use the following three methods to solve it. You can choose the method according to your needs.
First of all, you can use the chkdsk command-line tool to check if there are bad sectors on the disk. Chkdsk, full name is checkdisk, can be used to check a particular disk partition via the command line. The tool will list and correct errors on the disk.
Step 1. Open the command prompt as admin: search for cmd > right-click on result > select run as admin.
Step 2. Next, type “chkdsk /F” and press Enter. Then waiting for checking. When it has done, you will see if there are any problems with the disk.
Note:
If you don't know how to use the chkdsk, you can type “help chkdsk” and press Enter. It will display some commands. Then you can choose them according to your needs.
The second method is to clone the disk with Acronis bootable rescue media. First, you need to create a an Acronis bootable rescue media using Acronis software. After it is complete then clone the bootable disk. This can fix Acronis clone failed to read data from the disk.
If you think this method is a little bit difficult, you can choose to use method three which is much easier to operate.
Method three is to use professional disk cloning software - AOMEI Backupper Professional to solve this problem. Since it can clone the disk successfully in Windows 10/8/7/XP/Vista without the help of a bootable disk even when there is any bad sector. By default, with the help of intelligent clone, it can skip the bad sectors and clone other sectors. Besides, it can ensure a secure boot. Furthermore, it can also operate the disk clone task in the background without affecting the normal use of computer.
Here is a graphic tutorial on how to clone a hard drive directly using AOMEI Backupper.
Step 1. Download AOMEI Backupper Professional, install it, and open it. Then click Clone > Disk Clone.
Tips:
If you only want to clone the operating system, you can choose the System Clone feature.
Professional edition supports cloning both data disks and systems disks from MBR to MBR/MBR to GPT, or GPT to GPT/GPT to MBR. If you only want to clone data disks, you can pick the complete free Standard edition.
Step 2. Select the hard drive you want to clone as the source disk.
Step 3. Choose a disk as the destination disk.
Step 4. Confirm all your operations. Then click Start Clone.
Notes:
The three methods mentioned in this article can help you solve the Acronis clone failed to read data from the disk. I would like to choose the last one - AOMEI Backupper, because this software not only allows you to clone directly and boot safely but also can clone disks with bad sectors.
Besides, it is also a popular backup software that offers various backup forms and backup schemes, you can download this software and explore it by yourself.