Whether you want to clone Raspberry Pi SD card to larger card or smaller card in Windows 10 as a backup or for a card replacement, this guide will walk you through step-by-step instructions on how to creating a backup of your Raspberry Pi SD card, as well as provide step-by-step instructions
“I want to make a backup of my Raspberry Pi because I have done a lot of work and repeating the process would take a lot of time. How does one go about making an image of a Raspberry Pi SD card to the larger card for Windows 10? A step-by-step guide would be very helpful!”
The answer is YES, you can easily clone a Raspberry Pi SD card if you use the best Raspberry Pi SD card copier. It should support cloning the entire SD card to another one successfully.
To clone or backup Raspberry Pi SD Card, the simplest and safest way is to use an effective SD card copier like AOMEI Backupper Professional. It integrates complete features including the Disk Clone to clone Raspiberry CPi SD card easily. To make it, you can connect it to an external hard drive.
In addition, below are some useful features of it:
◆ It is capable of cloning Raspberry Pi SD card to larger card and smaller card successfully with the help of the Intelligent Clone feature and Sector by Sector Clone feature.
◆ If you are cloning Raspberry Pi SD card to SSD, it is able to accelerate the reading and writing speed of an SSD disk via 4k alignment technology.
◆ Except for cloning Raspiberry Pi SD card to another one, you can use it to clone Raspiberry Pi SD card to a USB drive, clone the Raspiberry Pi SD card to an SSD, etc.
◆ You can use it to clone Raspberry Pi SD card in Windows 11/10 and all the previous systems, including Windows 8.1/8/7/XP/Vista.
With all this information, you can get started to clone the Raspberry Pi SD card.
Preparations: ● Shut down your Raspberry Pi and remove the SD card. ● Install AOMEI Backupper on a Windows computer. ● Use an SD Card Reader to connect the Raspberry Pi SD card to the computer. ● If you want to clone the SD card to another, connect the destination card as well. If your computer already has an SD card slot, you just need to prepare one Reader.
Clone SD card to another with AOMEI Backupper effortlessly:
1. Launch the software, go to the Clone tab, and click Disk Clone. It will copy everything on the SD card.
2. Select the Raspberry Pi SD card as the source disk and click Next. Then choose the destination disk. In this case, it should be another SD card you just connected. Click Next to continue.
3. Customize the cloning as you need, then click Start Clone and wait for the process to complete.
◆ SSD Alignment: for a destination SSD, this option will accelerate the reading and writing speed therefore improving the performance. ◆ Sector By Sector Clone: to create an intact copy of all the sectors, you can tick this option when you want to clone the hard drive to a larger drive. Otherwise, it will only clone used sectors. ◆ Edit Partition: You can use this feature to adjust the destination disk’s partition size and drive letter. Thus, you will never encounter the cloned hard drive unallocated space left issue.
When the cloning is over, you can remove the SD cards, and insert the cloned card to the Raspberry Pi.
Tips:
The destination disk or SD card will be overwritten so please backup important data on it at first.
If you fail to connect two SD cards at the same time, you can backup the Raspberry Pi SD card to the computer first, and then restore the image file to the new card instead.
Insert your SD card into your PC using a USB or built-in card reader. Open a Terminal and type sudo fdisk -l to list all filesystems.
Identify the SD card's device name, usually shown by its size (e.g., a 16GB SD card may appear as /dev/sdb with 14.9GB). Take note of the device name.
Use the dd command to back up the SD card. For example: sudo dd if=/dev/sdb of=~/raspbian_backup.img
Replace /dev/sdb with your SD card's device name. The cloning process might take time based on the SD card size. Once done, safely remove the SD card.
Insert the SD card into your Mac using a USB or built-in card reader. Open Terminal and type diskutil list to find your SD card's device ID (e.g., /dev/disk3).
Unmount the SD card by running: diskutil unmountDisk /dev/disk3
Replace disk3 with your SD card's actual device ID.
Back up the SD card using the dd command: sudo dd if=/dev/disk3 of=~/raspbian_backup.img
Replace /dev/disk3 with your device ID. The cloning process may take time depending on the card size. Once complete, safely remove the SD card.
Q1: Can I use the same SD card on different Raspberry Pi devices?
A1: Yes, you can use the same SD card across different Raspberry Pi models, as long as you're using the latest Raspbian version. The newer boards need updated kernels, but they are backward compatible.
Q2: How do I back up my Raspberry Pi SD card over the network?
A2: To back up your Raspberry Pi SD card, you typically need to shut down the Pi, remove the SD card, insert it into a card reader on your computer, and run backup commands.
Q3: Can a Raspberry Pi damage an SD card?
A3: Yes, if you power off the Raspberry Pi improperly, it can corrupt the SD card. To prevent this, always use the "Safe Shutdown" option in the operating system or a dedicated shutdown button.
To clone a Raspberry Pi SD card to another, an effective Raspberry Pi SD card copier like AOMEI Backupper could be a big help. It works on all Windows OS and enables you to clone Raspberry Pi SD card to a larger or smaller card, USB drive, SSD, etc.
Also, it applies to cloning system disks or specific partitions, such as replacing laptop HDD with SSD, migrating only OS to another SSD, clone NVMe to another one, moving system reserved partition to another one, cloning HP recovery partition, and more.
And in daily use, it also works as an all-around data protection solution. Thus, you can use it to backup the system, backup disk, backup files or folders, etc as you like. Then, when something bad happens, you can use the backup image to get them back in a very short time.