The Best Solution for Crucial SSD not Booting after Clone

User Case: How do I fix cloned SSD not booting?            

“Hi, I have an Asus K450lc notebook running Windows 8.1. I just received my Crucial BX100 500GB SSD. However, I cannot get it to boot. I used a clone tool to completely clone my HDD to the SSD. I cloned all the partitions from the old drive and changed the size of the data partition to fit the SSD. (I tried cloning 4 different times, with no difference). But when I swap out my old HDD for the SSD, windows doesn’t boot.”

If you’ve recently cloned a Crucial SSD and it’s not booting, you’re not alone. This is a common issue that can be caused by a variety of factors. In this article, we’ll discuss why this problem occurs, how to fix it, and what is the best disk cloning software for fixing the “Crucial SSD not booting after clone” problem.

Why Crucial SSD not Booting after Clone?

There are several reasons why your Crucial SSD may not be booting after a clone. The most common cause is that the cloning process was not done correctly. This could be due to the reasons below.

• The source drive you cloned has faulty sectors.
• The system was corrupted during the cloning procedure.
• The partition that was "system reserved", not cloned.
• Set the boot drive to the wrong drive.
• While switching from HDD to SSD, the drive letter may have changed. And this progress may result in missing boot files.
• The cloned disc will not boot due to a GPT/MBR conflict.

How to Fix Crucial SSD not Booting after Clone

The first step in fixing the problem is to make sure that the cloning process was done correctly. If you used a cloning software, make sure that it is compatible with your Crucial SSD. Also, make sure that the settings were correct and that the drive was properly formatted before the cloning process.

If the cloning process was done correctly, then the problem may be due to a faulty drive. In this case, you will need to replace the drive.

The Best Solution for Crucial SSD not Booting after Clone

When it comes to cloning your Crucial SSD, the best disk cloning software is AOMEI Backupper Professional. This software is specially designed for cloning hard drives and SSDs and it is compatible with all major brands. You can choose to clone an entire disk or clone a partition or volume according to your needs. After cloning, you can successfully boot your computer from the cloned disk.

Intelligent clone: By default, it uses the Intelligent clone feature. Only used sectors on the disk will be cloned. So you can easily clone a large disk to a small one.

Sector by sector clone: If your target disk is equal or larger than the source disk, you can use this function to clone all sectors whether used or not. This way no hidden sectors are missed.

Various disk types: It supports various disk types, including SATA/IDE/PCIe disks, M.2 drives, NVMe SSDs, etc.

Multiple SSD brands: In addition to Crucial SSDs, it also supports multiple brands of SSDs, such as SanDisk, Samsung, Toshiba, etc.

SSD Alignment: This function can speed up the reading and writing speed of the target SSD and make the SSD perform better.

Different operating systems: It supports multiple Windows operating systems, including Windows 11/10/8/8.1/7/XP/Vista, etc.

The cloning process will erase all data on the target disk. If you have important files on the target disk, remember to backup files to an external hard drive first. If you are a Windows Server user, you can try to pick the version of AOMEI Backupper Server.

Step 1. Connect the Crucial SSD to your computer. Download AOMEI Backupper Professional, install and open it. Click Clone > Disk Clone.

Note:

Professional edition supports cloning both data disks and systems disks from MBR to MBR/MBR to GPT, or GPT to  GPT/GPT to MBR. If you only want to clone data disks, you can pick the complete free Standard edition.

Step 2. Choose your old HDD as the source disk.

Step 3. Choose the Crucial SSD as the destination disk.

Step 4. Tick SSD Alignment to make the disk’s reading and writing speed faster. Confirm your operations and click Start Clone. 

Note:

• Edit Partitions: You can change the partition size when your target disk is larger than the source disk. 

Summary

If your Crucial SSD is not booting after clone, it could be due to a variety of factors. Make sure that the cloning process was done correctly, and if not, use AOMEI Backupper to clone your drive. This software is designed specifically for cloning hard drives and SSDs, and it offers a variety of features to make the process easy and efficient. After clone, you can successfully boot your computer from the cloned SSD.

Apart from that, this software also provides various useful features like disk image, partition clone and system recovery. You can download this software to explore more useful or interesting functions.