This article provides three detailed methods to help you solve Acronis clone not booting problems, and finally recommends a professional disk cloning software for secure booting.
Hi, here! Acronis clone won’t bootable may due to the following reasons:
It can also be due to some security software interference or incomplete cloning process and other factors. Identifying the specific cause can help in finding an appropriate solution to make the Acronis clone boot successfully.
If you can't pinpoint the cause, that's okay. This article will provide you with several effective ways to help you solve Acronis clone not booting problem, please try them one by one until your problem is solved.
Especially important is to make a good habit of backing up! Use the best backup software - AOMEI Backupper to perform disk backup to protect your important data.
👉Recommend: Perform Disk Clone Without Booting Problems
If you are experiencing issues with an Acronis clone not booting, there are several ways you can take to troubleshoot and resolve the problem. Here's a step-by-step guide:
Ensure that the cloned drive is properly connected to your system. Verify that the boot order in the BIOS/UEFI settings is configured correctly, with the cloned drive set as the first boot device.
Step 1. Ensure your computer is powered on, and then restart it.
Step 2. During the startup process, you need to access the BIOS or UEFI settings. The key to enter these settings varies (common keys include F2, Del, Esc, F10, or F12). Check your system's manual or look for on-screen prompts during boot.
Step 3. In the BIOS/UEFI settings, select Boot, and after selecting the cloned drive, use the appropriate key (usually Page Up/Page Down or +/-) to move it to the top of the boot sequence. This action makes the cloned drive the first boot device.
Step 4. Save the changes you made to the boot order. Look for option Exit. Confirm the action when prompted.
After saving the changes, your computer will restart. It should now boot from the cloned drive.
You can try to repair Master Boot Record (MBR) or GUID Partition Table (GPT) when you encounter Acronis disk clone not bootable by following steps.
Step 1. Use the Windows installation media or a recovery disk to access the Command Prompt. And run following commands.
Tip: If you don't know how to boot from Windows installation media or a recovery disk, click the following article to get the steps - How to Boot Windows 10 from USB Flash Drive (2 Approaches)
For MBR:
bootrec /fixmbr bootrec /fixboot
For GPT:
bcdboot C:\Windows /s S:
(Replace "C:" with the drive letter where Windows is installed and "S:" with the letter assigned to the EFI system partition.)
Step 1. Boot from the Windows installation media or recovery disk.
Step 2. Choose the Repair your computer option, and go to Troubleshoot> Advanced options> Startup Repair to solve Acronis True image clone not booting issue.
Is there a solution to clone a disk without encountering booting issues? Absolutely! It is strongly advised to employ AOMEI Backupper Professional, the top-notch cloning software compatible with Windows 11/10/8.1/8/7/Vista/XP.
With its user-friendly interface, AOMEI Backupper Professional facilitates a seamless disk cloning process, ensuring a successful boot from the cloned disk.
▶Disk Clone Feature: This software facilitates transferring all data from one hard drive to another. Additionally, the Partition Clone feature allows copying specific partitions. ▶Cloning HDD to Smaller SSD: The software permits cloning from a large HDD to a smaller SSD, provided the destination disk has sufficient capacity for the source data. ▶Support for Various Disk Types: It accommodates different disk types—SATA/IDE/PCIe, M.2 drives, NVMe SSDs, etc. To experience faster reading and writing speeds, it is recommended to clone Windows 10/11 to an NVMe SSD.
To clone a disk without encountering boot issues, follow these steps:
Step 1. Ensure the disk is connected to your computer and is detected. Download AOMEI Backupper for free, and install and launch the application. Navigate to Clone> Disk Clone.
Easiest Windows clone software for personal use.
Important Points: 1. If your goal is to clone only the operating system, utilize the System Clone feature. 2. For cloning a disk without an operating system, like an external or USB drive, consider using the free disk clone software - AOMEI Backupper Standard.
Step 2. Choose the old disk as the source disk.
Step 3. Proceed by choosing the new disk as the destination disk.
Step 4. Proceed to the final page. Check the SSD Alignment box to enhance disk performance, then click on Start Clone.
Useful Tips: ● You can clone various scenarios, including cloning a bootable CompactFlash card, HDD to SSD, SSD to a larger SSD, and copying data from USB to USB with this software. ●If you encounter issues where Windows won't boot from a cloned SSD on a different computer due to dissimilar hardware, consider using the System Backup feature. Create a system image, generate a bootable media to initiate WinPE on the target computer, and execute Universal Restore for successful boot after restoration. ●For convenient disk cloning on different computers without repetitive installations, employ the Technician or Technician Plus edition to create a portable version on a removable device.
This article provides three detailed methods to help you solve Acronis clone not booting problems, and finally recommends a professional disk cloning software for secure booting - AOMEI Backupper.
Leveraging AOMEI Backupper, effortlessly clone your HDD to SSD, ensuring seamless booting from the cloned SSD. Additionally, optimize the reading and writing speed of the SSD and extend its lifespan. Feel free to download and explore these features firsthand.