Want to replace computer hard drive but donβt know how to clone old HDD to new SSD safely? This article will help you out.
Every old hard drive comes from new hard drive. We store OS, software, programs, files, videos, music and the like on our hard drive. As time goes by, the hard drive stores too much data and is overwhelmed. Hardware on the hard drive will fail gradually, so all contents on the old hard drive have the risk to lose. You can clone old hard drive to new hard drive or new SSD, depending on your budget.
Except for replacing failing hard drive, you may want to clone old disk to new to upgrade disk capacity. That is, clone smaller disk to bigger one. Further, to get better experience, many users tend to clone boot drive to SSD and keep the old hard drive as storage. That arrangement makes full use of the advantages of each type of storages.
Some users try to clone laptop hard drive to new instead of buying a new laptop. No matter what factor leads you to the way of cloning old hard drive, you need to think how to perform the cloning. Now, let’s get to know what kind of cloning tool you’ll need and how to operate.
Given that you have purchased an SSD that is smaller than the current old hard drive. When you want to clone everything from the old hard drive to the SSD, you may get this “Target disk is too small for this operation” error using some cloning software. Actually, this is not a technical issue. This may be simply because the cloning software you use doesn’t support clone larger hard drive to smaller one.
Luckily, specialized cloning software AOMEI Backupper Professional can deal with the issue perfectly.
Easiest hard drive clone software for Windows PC.
After downloading AOMEI Backupper on your PC, you can follow the instructions below to clone old HDD to new SSD.
1. Check your computer manual or search online to find out how many hard drive slots your computer has.
2. Connect the new SSD based on your situation:
1. Install and start AOMEI Backupper. Click Clone and then Disk Clone.
2. Select the current old hard drive as the source disk.
3. Select the smaller SSD as the target disk.
4. Check SSD Alignment box since the destination disk is an SSD. The default cloning method is intelligent clone, meaning cloning only used part on the source disk. Click Start Clone to copy old hard drive to new SSD.
π‘ Helpful Tips:
π You may receive this information if you clone from GPT disk to MBR disk and the GPT disk has more than 3 partitions:
“Note: The source disk contains over 3 partitions. Disk Clone only supports to copy 3 partitions at most from GPT disk to MBR disk. You could use Partition Clone to copy the remaining partitions to this destination disk.”
As a suggestion, you can merge partitions without losing data to make the partition number of the GPT disk fit the MBR disk.
π To clone old hard drive to new computer that has different hardware, it is suggested to create a backup image for the old hard drive and then perform dissimilar hardware restore on the new computer.
1. Shut down your computer on completion.
2. Boot from the new SSD based on your situation:
Note: If you are cloning a GPT disk to an MBR disk or vice versa, you should also change boot mode in BIOS to make your computer boot successfully. That's because a GPT disk uses UEFI boot mode while an MBR disk uses Legacy boot mode.
In general, it is quite easy to clone old hard drive to a smaller SSD with the help of AOMEI Backupper. This cloning software is also a perfect backup solution, for example, scheduled backup to external hard drive. AOMEI Backupper is good alternative to File History in Windows 8, 8.1, 10, 11 and Backup and Restore in Windows 7 as well. This all-around tool can be pretty helpful in building your PC backup strategy.