Dell Latitude 7420 SSD Upgrade: Graphic Tutorial

Advantages of Upgrading the SSD on a Dell Latitude 7420

The Dell Latitude 7420 is a versatile and high-performance laptop designed to meet the needs of professionals, creatives, and demanding users. While it already comes with an SSD, upgrading it can offer two main benefits: increased storage capacity and enhanced speed.

Switching to a higher-capacity SSD or choosing a model with faster read and write speeds can greatly reduce loading times, boost multitasking abilities, and improve overall system responsiveness. Curious about how to perform Dell Latitude 7420SSD upgrade? Read on to find out.

Get Ready to Upgrade the SSD on Your Dell Latitude 7420

Here are the tools you'll need to upgrade the SSD in your Dell Latitude 7420 SSD:

• A new M.2 PCIe NVMe SSD, such as the Samsung 970 EVO or Samsung 970 PRO
• An external enclosure to connect the new SSD for cloning
• Torx and Phillips screwdrivers, along with a small pry tool for removing the bottom cover
• An anti-static wrist strap (optional but recommended)

How to Upgrade Your Dell Latitude 7420 SSD

With everything prepared, you can achieve the goal of Dell Latitude 7420 SSD replacement.

Transfer OS and Data to the New SSD

To migrate your operating system and data from the old SSD to the new one and make it bootable, you'll need reliable disk cloning software, as Windows lacks this feature. I recommend AOMEI Backupper Professional for its simplicity and efficiency:

☁Versatile Cloning Options: It can clone a larger drive to a smaller one with its intelligent clone feature or create an exact copy of the source disk with sector-by-sector cloning. ☁SSD Optimization: The "SSD Alignment" feature enhances SSD performance by ensuring all partitions are properly aligned on the new SSD. ☁Wide Compatibility: It supports a wide range of SSD brands and models, including Samsung, Crucial, and WD, as well as various interfaces like SATA and M.2 NVMe. ☁User-Friendly Interface: Its intuitive interface makes operations easy for both experienced users and novices.

Download this SSD cloning software and get started!

Follow the steps below to clone your old SSD to the new SSD for Dell Latitude 7420SSD upgrading:

Step 1. Attach the new SSD to your laptop using the external enclosure you prepared.

Step 2. Install and open AOMEI Backupper. In the main interface, click on the "Clone" tab and select "Disk Clone."

Step 3. Choose your current SSD as the source disk and the new SSD as the destination disk.

Step 4. Check the "SSD Alignment" box to optimize the target SSD's performance and prolong its lifespan. Click "Start Clone" to begin the cloning process. AOMEI Backupper will start copying data from the source SSD to the target SSD.

Replace the SSD on the Dell Latitude 7420

After migrating your data, you can replace the old SSD with the new one:

1. Power down your laptop and unplug it from the power adapter.
2. Place the Dell Latitude 7420 face down. Remove the 10 Torx head screws from the bottom edges and 2 Phillips head screws in the center.

3. Gently pry off the cover using a pry tool.
4. Remove the screw at the base of the SSD. Carefully peel off the gum-like insulation material (set it aside for reuse).

5. Lift the old SSD at a 20-degree angle and slide it out. Insert the new SSD at the same 20-degree angle.
6. Lay the new SSD flat, replace the screw, and reapply the insulation.
7. Reposition the laptop's base panel and secure it with the 12 screws.

Boot Your Dell Latitude 7420 from the New SSD

• Press the power button in the top right corner to boot the laptop.
• Immediately press and hold F12 until the Boot Menu appears.
• Use the arrow keys to select the new SSD as the boot device.

Final Thoughts

That's everything you need to know about Dell Latitude 7420SSD upgrading. While the process might seem complex, the benefits can be significant. Using AOMEI Backupper, the best disk cloning software, can save you from the hassle of reinstalling Windows from scratch. Additionally, AOMEI Backupper offers many other features, such as automatic file synchronization to external hard drives. Give it a try!