With data security issues at stake, you need to perform a dropped external hard drive recovery using a reliable way. And here are two. Moreover, repair and prevention methods are included.
External hard drives are not as tough as you might think. With multiple moving parts, they are fragile devices. Even a short drop can cause physical damage, whether on a soft surface, especially if the drive is still attached to a computer when it is dropped.
You may not have a clear idea of the symptoms of a dropped external hard drive. We've collected some common symptoms you may experience below.
In some cases, your hard drive seems to be fine, without any unusual behavior. However, you may find some of the above symptoms become apparent later. Thus, even so, it is still suggested to copy all the files on the dropped disk to another storage device.
After dropping external hard drive, you may want to repair it in the first place. But the problem is any operation on this disk may cause further data loss. Considering this, it’s suggested to recover data from a dropped hard drive.
In general, you cannot use data recovery software to get your data back in this scenario, because it is physical damage instead of logical damage. But in some cases, it is capable.
If your drive meets the above conditions, you can still recover data from dropped external hard drive yourself with the software. If not, it is advisable to disconnect your drive and contact a professional data recovery service.
When it comes to data recovery software, MyRecover is highly recommended for its quick scanning methods, high success rate, and wide compatibility.
Now please download and install this professional data recovery software. You can then follow the steps below to start a dropped hard drive recovery.
Step 1. Connect the external hard disk using SATA to USB adapter or enclosure. Then, Launch this external hard drive recovery software - MyRecover. Hover the mouse over the drive saved deleted files before, and click Scan.
Step 2. It will run two advanced scanning methods automatically and display all the files stored on the external disk. It can be documents, images, videos, mails, etc.
Note: To recover only specific files, you can filter and select them for immediate recovery. Or expand the Other Missing Files tab and go to the folder containing your files. So you don’t need to wait until the scanning process to complete.
Step 3. Select all the found files on the external disk and click the Recover x files button. You will then be asked to select a location. Please select a new location instead of the original location to prevent potential data overwriting.
Notes:
In most cases, seeking help from a professional data recovery service is the best choice to recover data from a dropped external hard drive. Although expensive, the success rate is higher. They usually offer highly skilled technicians with professional expertise and advanced recovery equipment for data recovery.
Step 1. Find a professional data recovery service (eg: Geek Squad) and contact them for dropped hard drive recovery. You need to claim the disk problems and offer some basic information, such as email address, phone, etc.
Step 2. Ship your drive to the service center for evaluation. If the service is available nearby, you can choose to submit it for evaluation at the drop-off location.
Step 3. After evaluation, the data recovery service will contact you with a quote and the recoverable data volume. Now you need to make a decision. If you agree, they will start to recover your data and return them back with a specified device.
Notes:
After dropping external hard drive recovery, you can try to check this disk cable or USB port. If either of them is damage, replace with a new one. Also, try other methods in the following.
Windows comes along with multiple commands, such as CHKDSK, which is able to detect and fix bad sectors on the disk. You may be at risk of erasing your data from the dropped external hard drive. So be sure you start a dropped hard drive recovery first.
Step 1. Type cmd in the search box and select Run as administrator.
Step 2. In the command prompt window, type chkdsk *: /f /r /x and press Enter. It will start the scanning process and mark bad sectors as unusable. Please replace * with the drive letter of your external disk.
You could also consider disassembling the casing and swapping out the controller board if it's the only damaged component in the external hard drive. Usually, it consists of a regular HDD and a PCB (acting as the controller) and is attached to the SATA port.
Then, connect this external drive internally to the motherboard or use a SATA to USB cable to connect it as an external storage device.
To ensure your data on external disk are always safe, you can also consider using reliable Windows backup software - AOMEI Backupper Standard to backup them regularly.
Step 1. Download and install this reliable backup software - AOMEI Backupper Standard. Launch it, select Backup and File Backup.
Step 2. Click Add Folder or Add File and select your data on the external disk. Please be sure your disk is connected.
Step 3. Click the dropdown and select a local path, share or NAS, or cloud drive. Then, specify an available device, such as another external disk.
Step 4. Click Schedule Backup > Enable Schedule Backup and select Daily, Weekly, Monthly, Event trigger, or USB Plug in.
Step 5. Finally, confirm you select all the important data and click Start Backup to backup them completely.
Dropping external hard drive may cause severe consequences, even for a short time, but with the right method, you are able to start a dropped external hard drive recovery and get your data back as soon as poossible.
Don’t try to recover data on your own with software unless you are sure it’s recognized and there is no clicking, whirring, or beeping sounds. If either of them are not sastisfied, the best choice is to consider using professional data recovery services.