Want to repair flash drive using CMD? Do not worry too much. On this page, you will know how to repair flash drive using CMD and protect your data from data loss.
A USB flash drive can encounter an array of problems, such as a RAW flash drive, a failure in recognition by the system, corruption, unreadability, or physical damage. Windows users have the option to repair flash drive using CMD.
This method enables the resolution of flash drive glitches without resorting to third-party software or formatting. Given the involvement of the Windows Command Prompt, meticulous attention to each step is advised.
If you need to repair USB using CMD, one of the most important tips is to recover data from your flash drive, avoiding data loss.
For a non-destructive USB flash drive recovery, a proficient Windows data recovery tool, MyRecover, comes to the rescue. The software employs two advanced scanning methods to seamlessly retrieve all data from the USB flash drive.
This tool boasts the following advantages:
To initiate the process, download MyRecover, the Windows data recovery software, and install it on your Windows PC. Simultaneously, connect the flash drive properly.
Step 1. Launch MyRecover Windows data recovery software. Hover the mouse over the drive saved deleted files before, and click Scan.
Step 2. The software will perform two comprehensive scanning methods- Quick Scan & Deep Scan automatically, unveiling all flash drive data. The subsequent window will display any discovered files. Preview and select files for immediate recovery.
Step 3. Following the scanning phase, select all data from the designated drive and initiate recovery by clicking Recover X files.
📌 Notes:
CMD can be used to execute any installed program on your computer. The process is straightforward: input "cd [filepath]" in the Command Prompt, substitute [filepath] with the Windows Explorer path to the desired file, and press Enter. Subsequently, type "start filename," replacing "filename" with the executable file's name, and execute.
You can use CMD command to recover files from USB. And several methods can effectively perform pen drive repair with CMD. Three methods here necessitate no additional software downloads, employing the Windows Command Prompt.
One method to recover USB drive files via CMD involves the use of the "attrib" command. Occasionally, malware alters file and directory attributes, rendering them inaccessible or hidden.
The "attrib" command in CMD restores original attributes, reinstating access to files and folders.
Instructions for using the "attrib" command:
1. Input "cmd" in Windows Search (Windows Key + S) and right-click Command Prompt in the search results, selecting "Run as administrator."
2. In the console, type the drive letter followed by a colon (e.g., X:), where "X" represents the USB drive's drive letter, and press Enter.
3. Next, input the following command and press Enter: "attrib -h -r -s /s /d drive letter:\*.*".
4. Files previously obscured due to a virus should now become visible.
CHKDSK, an inherent Windows command line utility, is instrumental in rectifying USB drives via CMD. It systematically scans and identifies disk errors, including the detection and repair of bad sectors, and resolving drive corruption.
💡 Note: The CHKDSK command is ineffective for RAW USB drives, except if the USB drive was initially formatted in the NTFS file system.
Following CHKDSK execution, scanning the drive with USB data recovery tools can recover any potentially lost data.
The process for fixing a USB drive via CMD using CHKDSK is as follows:
1. Launch Command Prompt as administrator, using Windows Search (Windows Key + S).
2. In the CMD console, type "chkdsk F/f" (replace "F" with the USB drive's letter) and press Enter.
3. Allow CHKDSK to complete the scan and repair process. The duration may vary based on the USB drive's size.
Diskpart, a Windows command line utility, facilitates the management and modifications of physical and virtual drives. Employing Diskpart to format a RAW or corrupted USB drive not recognized into a recognized format constitutes an effective CMD-based method for USB drive repair.
Although formatting erases all USB drive data, recovery remains possible through data recovery software like MyRecover mentioned above, especially when opting for Quick Format. Careful execution of Diskpart commands, with the inclusion of specified parameters, is pivotal.
A tutorial for performing a Quick Format on a USB drive using Diskpart is as follows:
1. Search "CMD" in Windows Search (Windows Key + S). Launch Command Prompt as administrator.
2. Input "diskpart" in the console and press Enter.
3. Type "list disk" and Enter to enumerate connected storage devices.
4. Subsequently, input "select disk x" (replace "x" with the USB drive's disk number) and press Enter. If, for example, the disk number is 1, replace "x" with 1.
5. Enter "list volume" and press Enter.
6. Input "select volume x" (substitute "x" with the volume number), then press Enter. Volume number identification can rely on volume size or drive letter.
7. Lastly, input "format fs=ntfs quick" and press Enter. Diskpart will expedite a Quick Format on the USB drive. Alternatively, choose a different file system like FAT32 or exFAT by substituting "ntfs" accordingly.
While repairing flash drive using CMDrectification eradicates the need for third-party software, it's advisable to employ utilities like MyRecoverfor data recovery. In cases of severe corruption, data recovery might precede repair, as formatting could become essential to salvage the drive.