How to recover SSD partition? Two pragmatic methods are provided in this tutorial to facilitate users to perform SSD partition recovery.
Accidentally deleted the partition and I can't restore it, this happened to my 500 GB nvme SSD in my laptop. Does anyone know exactly what I have to do? I can't imagine the data being gone since I never overwrote anything so the data should still be there. Thanks for the help.
- Question from TestDisk & PhotoRec forum
No matter whether you are using HDD or SSD, users may encounter data loss issues. They may need to recover HDD partition or perform SSD lost partition recovery.
SSD partition recovery issue bothers users much. The reasons or triggers of SSD partition loss vary among users. Just as the user in the example above, accidental deletion or misoperation might be the major causes.
They may get busy as a bee attempting to recover the lost partition, and some users may doubt the SSD lost partition recovery is possible. Luckily, the answer is yes.
At this time, the space is identified as unallocated space by the Disk Manager when the partition is removed or deleted and will not be shown in the Explorer.
If a new partition is created, the original partition will be overwritten, and the data in it will also be lost.
In a word, SSD lost partition recovery is achievable as long as the space is not overwritten by fresh data.
Now, before coming to the solution part, it is necessary to lay a basic impression on users about the SSD and SSD partition loss.
In this part, you could get to know the definition of SSD, and the advantages and shortcomings compared with HDD.
SSD is what we usually refer to as Solid State Drives. It's a hard disk composed of integrated circuit assemblies.
Its storage media is classified into two types: flash memory and DRAM (Dynamic Random Access Memory). Intel's 3D XPoint particle technology is the most NVM (recent non-volatile memory) technology.
In addition to SSD, another storage device is the HDD, whose full name is Hard Disk Drive, it is a non-volatile memory that can retain stored data even when the power is turned off.
Compared with HDD, SSDs have faster reading and writing speed, no noise, anti-vibration, low average power consumption, and low heat. It also has some drawbacks: expensive, limited write times, read interference, difficulty to recover after data damage, and performance reductions.
However, Speed and capacity have always been the most challenging parameters of storage devices, and such devices must be small and power-efficient.
Because SSD offers a higher data transfer rate, greater storage density, higher reliability, and reduced latency and access time, most users choose SSD and utilize SSD as the system drive to enhance computer booting speed and performance.
Now, let us move on to the common reasons for SSD partition loss.
Partition loss on SSD occurs under various conditions. Some of them are listed as follows.
β Inadvertent deletion. To err is human. No one can avoid mistakes all the time. Users may have accidentally deleted partitions when planning to delete a partition but have deleted the wrong one.
β Partition table error. Improper operation or viruses in Master Boot Record can result in partition and data loss. Under such circumstances, users need to recover MBR partition table.
β Power outage. When performing operations such as partitioning the hard disk, a sudden power failure may make the partition table unrecognizable, resulting in partition loss.
β Bad sectors. Bad sectors on the disk may prevent the operating system from recognizing the partition.
β Drive letter missing. The volume may also disappear due to the missing of the drive letter, making it invisible and inaccessible in Disk Management.
In the next part, we are going to talk about how to recover SSD partition.
For a partition that has disappeared because there is no drive letter, the recovery method is very obvious: assign it a new letter, but the operation can be a little difficult - because users need to use the command prompt.
In the following, we will first provide you with the method of using the command prompt to perform SSD lost partition recovery.
Using CMD is quite dangerous, because users who are not familiar with CMD may type the wrong command, or misuse some commands, such as the "clean" command.
Step 1. To open “Command Prompt”, tab on “Win+R” and in the dialog box type “cmd”, and then input “diskpart”.
Step 2. Input “list disk” > “select disk m”. Here “m” refers to the number of the disk that contains the lost SSD partition on the hard drive.
Step 3. Input “list volume” > “select volume n”. Here “n” refers to the number of the lost SSD partition.
Step 4. Input “assign letter x” to name the partition. Remember to use a new letter different from all the existing letters.
Compared with the method given above, turning to a professional partition recovery tool could be much safer and easier.
Because there is a great potential that users might input the wrong command line or select the wrong disk or partition, which may cause an unimaginable dangerous result.
So if you discover that the partition has been lost or deleted, you might as well use a professional SSD lost partition recovery program to recover the partition and the data contained within.
Here AOMEI Partition Assistant Professional Edition is recommended. It can restore the lost or deleted partition and protect the data within from damage as long as the data is not overwritten.
Step 1. Download and start the AOMEI Partition Assistant. Enjoy the features for free in the Demo version.
Step 2. Click “Partition Recovery Wizard” in the toolbar, select the disk that contains the lost SSD partition, then click “Next”.
Step 3. Select “Fast Search”. Then click “Next”.
Step 4. Then your lost SSD partition will be detected. Select the one you want to recover, then click “Proceed”.
This tool always devotes itself to scanning hard disks for deleted partitions. Thus you have easily implemented SSD lost partition recovery.
AOMEI Partition Assistant can not only effectively recover lost or deleted partitions on SSD drives or other hard drives, but also migrate operating systems to SSD drives, erase SSD drives, convert basic disks to dynamic disks, or convert dynamic disks.
To perform SSD partition recovery, find out if it is hidden or lost/deleted first, then take the appropriate steps. If it is hidden because of driver letter loss, assign a letter to it; if it is lost somehow or mistakenly deleted, utilize the AOMEI Partition Assistant to solve it.
When seeking approaches to restore deleted or missing data from SSD, instead of trying hard to solve it by yourself, you would better let MyRecover to help you.
Incidentally, it is sagacious to form a habit of regular data sync and backup to ensure data security. For the sake of time and labor, AOMEI Backupper can be of great help.