SSD Showing RAW File System? Fix It Now!

When you are using the hard disk, suddenly you see that the SSD shows RAW file system error. What's going on here? How to solve it? In this article, we will tell you why the SSD becomes RAW and how to solve this problem effectively.

Why SSD showing RAW file system?

When you see a RAW partition on Windows, it means that the operating system does not recognize the file system on that partition. If a hard disk formatted for macOS is inserted into a Windows PC, the partition will also be reported as RAW. if the partition or volume is damaged, it may also appear as RAW.

Several factors contribute to an SSD becoming RAW. This transformation can occur suddenly or gradually over time due to changes in the file systems. Let us explore these causes to comprehensively understand RAW drives on Windows PCs.

• Bad Sectors: A bad sector refers to a damaged portion of a hard disk, where any information stored in that sector is irretrievably lost. Consequently, the operating system ignores these areas during the reading or scanning process.
• Virus Corruption: If a hard drive falls victim to a virus or malware attack, it can lead to improper formatting, ultimately resulting in a RAW file system.
• File System Errors: A RAW drive lacks a recognized file system, making it undetectable and unreadable by the Windows OS.
• Improper Usage: Negligence in maintaining your hard drive can contribute to these errors. Physical mishandling, exposure to excessive heat, sudden power surges, and other factors can cause damage to the drives.

Fix SSD showing RAW file system: 3 approaches here

Now that we have identified the reasons behind these errors, let us proceed to learn about the methods available to fix them.

Fix 1. Fix SSD showing RAW file system via Diskpart

You have the option to manually resolve this issue by utilizing the command prompt. This method will rectify the RAW hard drive but will result in the formatting of the drive. To accomplish this, we need to follow a series of Diskpart Commands and employ a Windows Utility tool.

Follow the guideline here to resolve the SSD in raw format error.

1. Open the Command Prompt in Administrator mode. Press the Windows key + R to initiate the "Run" function, type in "cmd," and then press Control + Shift + Enter to launch the command prompt as an Administrator. Alternatively, you can manually search for the command prompt and run it as an Administrator.

2. Execute the following Diskpart Commands to view all the partitions on your system, including the RAW hard drive:

• diskpart
• list disk
• select disk 1 (Replace "1" with the number corresponding to the RAW disk)
• list volume
• select volume 10 (Replace "10" with the number corresponding to the RAW volume)
• format fs=ntfs quick
• exit

Fix 2. Fix RAW SSD with Disk Checking Tools

Utilizing the Check Disk tool is an effective approach to scanning and resolving potential file system errors on your selected drive. In the event that Windows cannot access the disk and prompts a notification stating that the disk check could not be performed, you can proceed to explore alternative methods to address the issue.

Follow the steps below to fix the SSD file system RAW:

1. Launch File Explorer and right-click on the SD card you wish to check. Then, select "Properties."

2. Switch to the "Tools" tab within the properties window and click on the "Check" button. Confirm your selection by clicking "OK."

3. Proceed with the "Repair drive" option and carefully follow the provided instructions to restart your computer.

Fix 3. Format the RAW SSD

If the previously mentioned fixes fail to resolve the issue and the SSD remains unresponsive, formatting the drive becomes necessary to restore its functionality. Formatting will create a new file system on the SSD.

Tip: Formatting the disk will result in the deletion of all files stored on the hard drive. Therefore, it is essential to back up hard drive before formatting.

Follow the steps below to format your SSD device:

1. Right-click on the start menu and run "Disk Management."

2. Connect your SSD device o the computer. Right-click on the drive within the Disk Management window and choose the "Format" option. Specify the desired file system, such as NTFS, during the formatting process.

How to fix SSD showing RAW file system without losing data

When faced with the sudden occurrence of an SSD showing RAW file system, the top priority for most users is data recovery. The urgency leaves users with no time to spare in retrieving their valuable data.

So, how can one recover data from RAW SSD quickly? The answer lies in utilizing efficient Windows data recovery tools.

The Internet is flooded with various data rescue tools, making it challenging to determine the best one suited to your specific needs. However, among the array of popular and reputable applications, AOMEI FastRecovery stands out as the most cost-effective and valuable option. Its unique features and advanced technology empower users to effortlessly scan and restore their desired files in just three simple steps.

1. Connect your RAW SSD device to your computer properly. Choose the SSD option on the home page. Hover the mouse over the drive, and click Scan to let AOMEI FastRecovery scan it.

2. AOMEI FastRecovery will scan your RAW SSD with both Quick Scan and Deep Scan.

3. Check the scanning result, and choose your wanted files. Press the Recover x files button. Please select a safe path on your computer to save the recovered files.

Written in the end

This article explores two methods to address this SSD showing RAW file system issue: employing the effective Diskpart Commands, Disk Checking Tools, or format the RAW SSD. We also introduce the reliable AOMEI FastRecovery software to recover data from SSDs quickly and easily.