Fix on Seagate External Hard Drive Not Showing Up on Mac

This comprehensive guide delves into troubleshooting methods when your Seagate external hard drive not showing up on the Mac. From understanding the causes to implementing practical solutions, this article equips you with the knowledge to resolve the issue effectively.

By @Sebastian Last Updated July 17, 2024

Why Your Seagate External Hard Drive is Not Showing Up on Mac

Common Causes of the Issue

When your Seagate external hard drive is not showing up on your Mac, it can be due to a variety of reasons, ranging from simple connection issues to more complex software problems. Understanding these causes is the first step in troubleshooting.

Potential Issues:

📌Connection Issues: The most common reason is a poor or faulty connection. This can be due to a defective USB cable, a damaged USB port, or a loose connection. 📌Power Supply Problems: Some external hard drives require more power than a single USB port can provide. If the drive is not getting enough power, it might not be recognized by your Mac. 📌Drive Not Mounted: The drive might be connected, but not mounted. This can happen if the drive was not ejected properly or if there's an issue with the file system. 📌Disk Utility Issues: Sometimes, the drive is detected by the system but needs to be manually mounted or repaired using Disk Utility. 📌File System Incompatibility: The drive might be formatted in a file system that macOS cannot read, such as NTFS (without third-party software). 📌Corrupt Drive: The hard drive might be corrupted, causing it to not show up. This can happen due to improper ejection, malware, or physical damage.

Solutions to Fix Your Seagate External Hard Drive Not Showing Up on Mac

If your Seagate hard drive isn't working on the Mac, the issue could be due to straightforward causes. It might be as simple as a loose connection, or your Mac might not be recognizing the drive. Here are some basic checks you can perform to ensure your Seagate external hard drive isn't internally damaged.

Fix 1: Check Your Seagate External Hard Drive on Mac

Step 1: Check the USB Cable

Ensure the USB cable is firmly connected to both the Seagate hard drive and your Mac. Sometimes, a loose or damaged cable can cause connectivity issues.

Step 2: Test Different USB Ports

Try plugging the hard drive into different USB ports on your Mac to rule out port-related issues.

Step 3: Use an External Power Source

If your Seagate hard drive has an option for external power, ensure it is connected to a power source.

Step 4: Test on Another Computer

Connect the Seagate hard drive to another Mac or PC to determine if the issue is with the drive or your Mac.

Step 5: Inspect for Physical Damage

Check the hard drive for any visible signs of damage, such as cracks or dents, which could affect its functionality.

Fix 2: Check Disk Utility on the External Hard Drive

If your Seagate external hard drive appears in Disk Utility, you can be relieved that there’s likely no major issue with the drive itself. Usually, the operating system will automatically mount the drive when you plug it in via USB. However, if the drive isn’t mounted, you can manually mount it to gain access. Here’s how:

  • Open Disk Utility: Go to Applications > Utilities > Disk Utility.
  • Select Your Drive: Find your Seagate drive in the list on the left.
  • Mount the Drive: Click the "Mount" button to make the drive accessible.

Fix 3: Changing Preference Settings in Finder

If your Mac doesn't recognize Seagate external hard drive, you may need to adjust your Finder preferences. This should make your external drive visible in Finder and on your desktop. By following these steps, you can adjust your settings to ensure external drives are properly displayed.

Step 1: Open Finder, then select "Preferences" from the top menu.

Step 2: Under the "Sidebar" tab, check the box next to "External disks" to ensure Seagate external hard drives appear in Finder.

Step 3: Switch to the "General" tab and also check the box next to "External disks" under "Show these items on the desktop."

Step 4: After completing these steps, your connected Seagate external hard drive should be visible on your Mac's desktop.

Bonus: How to Sync Files from Seagate External Hard Drive to the Mac

Connection failures with a Seagate external hard drive can sometimes lead to data loss. To prevent this, AOMEI Backupper Mac offers a solution to sync your important files from the Seagate drive to your Mac. Its easy-to-use interface and powerful features make it simple to safeguard your data, providing a reliable and efficient way to ensure your information is always protected.

AOMEI Backupper Mac

Free Mac sync software to sync files and folders automatically

Step 1: Download and install the AOMEI Backupper Mac software on your Mac. Click on "New Task" to begin.

Step 2: Select the synchronization type that fits your needs. Basic Sync, Mirror Sync, and Two-Way Sync are excellent in sync.

Basic Sync: Copies files from the source location to the destination without removing the originals from the source. Mirror Sync: Creates an identical copy of the source files at the destination, ensuring the destination matches the source exactly by deleting any files at the destination that are no longer present in the source. Two-Way Sync: Updates files in both the source and destination locations, ensuring changes in one location are mirrored in the other.

Step 3: Choose the folders you want to sync as the source and destination.

Step 4: Customize your sync schedule and options to fit your preferences.

You can set how frequently you want the synchronization to occur—options include once, hourly, daily, weekly, or monthly. Additionally, you can specify the start time and choose whether the system should enter hibernation or shut down once the sync is complete.

Under the Options menu, you can customize the sync process further by including or excluding specific files and folders.

Step 5: Once everything is set, click "Sync" and let the process complete.

FAQs About Mac Cannot Detect Seagate External Hard Drive

Q 1: Can a faulty USB cable cause my Seagate external hard drive not to show up on my Mac?

A 1: Yes, a faulty or loose USB cable can prevent your hard drive from being recognized. Try using a different cable and connecting to different USB ports.

Q 2: Is it possible that my Seagate external hard drive has a hardware issue?

A 2: Yes, physical damage or hardware malfunctions can cause the drive not to show up. Inspect the drive for any visible damage and test it on another computer.

Q 3: What file system should I use when formatting my Seagate external hard drive for Mac?

A 3: For compatibility with both Mac and Windows, use exFAT. If you only use Mac, choose Mac OS Extended (Journaled) or APFS for better performance and features.

Tips for Preventing External Hard Drive Issues

Regularly Update Software and Drivers: Keep your macOS and external drive drivers updated to avoid compatibility issues. Safely Eject External Drives: Always eject your external hard drive safely to prevent data corruption or physical damage. Use Reliable Backup Solutions: Regularly back up your data using tools like AOMEI Backupper to ensure your data is secure and recoverable in case of any issues.

Conclusion

Experiencing issues with your Seagate external hard drive not showing up on your Mac can be frustrating, but with the solutions provided in this guide, you can effectively troubleshoot and resolve the problem. Whether it’s verifying physical connections, checking Disk Utility, or updating drivers, these steps will help restore your drive’s functionality. By following the tips and understanding the technical terms, you can prevent future issues and ensure seamless performance of your external hard drive on your Mac.