Solved: Windows 10 Inaccessible Boot Device After Clone

User Case

Inaccessible Boot Device is one of the typical BSOD (Blue Screen of Death) errors with the code 0x0000007b. Simply put, the message means that Windows lost access to the system partition during startup. When you encounter this error after cloning, you can’t boot Windows 10 normally from the cloned disk and access the computer data. All possible causes and how to fix the problem of inaccessible boot device after disk clone are described in the following section. Read on if you're interested.

What Causes Inaccessible Boot Device Error in Windows 10

Before knowing the corresponding solutions, some common causes of this error are as follows.

• Set the wrong drive to boot from. >>Go to Solution 1
• GPT/MBR conflict. >>Go to Solution 2
• Cloning a wrong disk. >>Go to Solution 3
• Source disk has bad sectors. >>Go to Solution 4
• System is corrupted during cloning process. >>Go to Solution 5

How to Fix Windows 10 Inaccessible Boot Device after Cloning

Here we provide you five solutions to solve this BSOD error, you can do it according to your actual situation.

Solution 1. Set the Cloned Drive as First Boot Option

The wrong boot device may cause Windows 10 inaccessible boot device error. If you have more than one hard drive on your computer, it's a good idea to go into the BIOS and change the boot order to start from the cloned hard drive.

1. Restart your computer. When the startup screen appears, continuously press a specific key (usually F2, F8, F12, Del) to enter BIOS Setup.
2. Select Boot and choose the cloned hard drive as the first boot option.
3. Press F10 to save and exit the BIOS. Then restart the PC to check if it can start successfully.

Solution 2. Change the UEFI/BIOS Boot Mode

MBR and GPT are two different partition styles with different boot modes. MBR is for Legacy boot mode and GPT is for UEFI boot mode. If the partition style is not compatible with the boot mode, there will also be a problem that the cloned drive cannot boot normally in Windows 10.

To change the boot mode, you can take the following steps:

1. Restart your computer. When the startup screen appears, continuously press a specific key (usually F2, F8, F12, Del) to enter BIOS Setup.
2. Under "Boot" tab, select "UEFI/BIOS Boot Mode". Then choose "Legacy" or "UEFI" according to the partition style.
3. Press F10 to save and exit the BIOS. Then restart the PC to check if it can start successfully.

Solution 3. Check If the Cloned Disk Contains OS

Cloning the wrong disk (data disk instead of operating system) can also cause the error of Windows 10 Inaccessible Boot Device. You can check if cloned disk contains OS. If not, re-clone the disk that contains OS to the hard drive.

Here are the steps to check:

1. Install the cloned hard drive to your computer.
2. Restart your computer from the original disk.
3. Open Windows File Explorer and open the cloned drive.
4. Look for the "Windows" folder on the cloned drive. ◈ If you find it, it means that you have an operating system installed on the drive, and the Inaccessible Boot Device error may be caused by another reason. ◈ If not, you probably have cloned a wrong disk. And you'll have to re-clone to the hard drive.

Solution 4. Run CHKDSK Tool to Repair Bad Sectors

Sometimes, if the source disk consists of bad sectors or is infected with a virus, the error of Windows 10 Inaccessible Boot Device after clone will happen easily. You can try to fix this BSOD error by running the CHKDSK utility.

★ Note: It's possible that running CHKDSK to repair the hard drive corruption would cause total data loss. So, backup files in advance.

To run the CHKDSK utility in Windows 10, take the following steps:

1. Start your computer from the original disk.
2. Type cmd in the search box and right-click to select Run as administrator.
3. Next, type " chkdsk c: /f /r " and press “Enter”.

4. Then you will be asked if you would like the CHKDSK utility to perform the scan the next time the system restarts. Simply type y (for yes) and press Enter.
5. Restart your computer, and the process may take a while to complete. When the process gets finished, re-clone Windows 10 to the hard drive.
6. Then, reboot your system from the cloned hard drive. Check if you have fixed the Inaccessible Boot Device error.

Solution 5. Run SFC Command to Repair System Files

If you think the system files are corrupted during cloning, then the Inaccessible Boot Device error occurs after cloning, you can run system file checker to check the disk and repair the damaged file.

1. Do not operate until the computer restarts automatically. It will attempt to repair and pop-up following screen. Choose “Advanced options” then.

2. Select Troubleshoot > Advanced options > Command Prompt.

3. Type sfc /sannow in the command prompt and press Enter to run it.

Most Secure Bootable Disk Cloning Software for Windows

If the error of Windows 10 Inaccessible Boot Device is not resolved after trying all of the above methods, I recommend that you use the most secure bootable disk cloning software—AOMEI Backupper Professional for Windows 11/10/8/7/XP/Vista, etc. It has multiple cloning features, including disk clone, system clone and partition clone. And with its help, you can securely boot from the cloned disk. It has some advantages as follows:

✪ You can use it to clone MBR to GPT, MBR to MBR, GPT to GPT, GPT to MBR without converting the partition styles. ✪ It supports System Clone, Disk Clone and Partition Clone. If you want to migrate your OS, you don't have to worry about cloning the wrong disk. This software automatically selects the system drive and related drives by default. It ensures safe boot after cloning, and you will not encounter the error that Windows 10 Inaccessible Boot Device after disk clone. ✪ It supports 3 cloning modes, including Intelligent clone, Sector by sector clone, live clone. Its default cloning method Intelligent clone will clone only used sectors from one hard drive to another while skipping bad sectors. Therefore, you can also clone large HDD to smaller SSD. ✪ It supports multiple HDD/SSD types. And SSDs are most used for its faster reading and writing speed than HDDs. It only takes a few clicks to clone to M.2 SSDs, NVMe SSDs, etc.

You can follow the graphic tutorial below to learn how to use this software to perform Disk Clone to clone a disk contains the Windows 10 operating system and then securely boot Windows 10 from the cloned hard drive. Firstly, download and install it.

Preparations: ▶ Connect or install the target disk to your computer in advance and make sure it can be detected. ▶ The cloning process will delete all data on the destination disk, so backup files if needed.

Step 1. Launch AOMEI Backupper. In the dark blue interface, click Clone -> Disk Clone.

Step 2. Then select the disk that contains OS and click Next.

Step 3. Select the destination disk and click Next.

Step 4. Confirm the settings and click Start Clone.

Tips✍: ✫ SSD Alignment: if the destination is an SSD, you can check this option to improve its reading and writing speed. ✫ Sector by sector clone: also known as bit-by-bit copying, means cloning all sectors on the drive, even if the sector is blank or it is a logically bad sector. As a result, the cloned drive will remain exactly the same as the source drive. ✫ Edit Partitions: You can change the partition size using this feature. You have three options -  Copy without resizing partitions, Add unused space to all partitions, Manually adjust partition size. If using sector by sector mode in disk clone, "Edit partitions on the destination disk" button is unavailable.

When the cloning process is complete, you can enter BIOS to boot from the cloned disk contains Windows 10 operating system securely.

Summary and FAQs

After reading this article, I assume that you may have learned a lot about the error of Windows 10 Inaccessible Boot Device after clone. There are many reasons for this BSOD problem, and the solutions are relatively different. Mastering each solution is too cumbersome. Therefore, I strongly recommend that you use the most secure bootable disk cloning software—AOMEI Backupper Pro.

Its powerful functions can help you protect your data with ease. Whether you want to backup, clone, restore, or synchronize files, it can help you instantly. In addition to solve this BSOD error on Windows, it can also be a quick solution to Windows 10 Startup Repair Not Working problem, OneDrive Sync Pending error, etc. Try it right now.

To learn more about the "inaccessible boot device" issue, read the FAQs below.