If you don't know how to fix Windows Server Backup greater than 2TB, continue to read this article and learn the possible reasons as well as 6 effective methods.
I know that Windows Server 2008 and 2008 R2 are limited to 2TB volume and the reason is Windows Server Backup uses VHD file and it has a 2TB backup limit. And I tried all suggestions on the internet but there is no luck. So, my question is: does anyone knows if there is a fix for 'Volumes larger than 2088958 megabytes cannot be protected. Thanks in advance.
This problem is usually found in earlier versions of Windows Server. Due to the limitation within Windows and the VHD file format, all volumes that are part of the backup must be less than 2TB in size. Also, it is likely to happen in newer system, such as, Windows 8 and Windows Server 2012.
Instead of using the BKF file (created by Windows NT and XP Pro), Windows Server Backup backup volumes to several virtual hard disk (VHD) files, each VHD file for a volume in the backup.
A VHD file has a capacity limit of 2040 GB (2TB). So in early OS using this format like Windows 7 and Windows Server 2008 R2, you cannot back up files and folders on volumes that require more than 2040 GB. Windows 8 and Windows Server 2012 as well as newer systems breaks the limitation, since they uses new file format - VHDX.
On the other hand, MBR (Master Boot Record), being an older partitioning scheme, sets a 32-bit limit on the number of bits that can be used to represent the number of logical sectors. The maximum number that can be represented using 32 bits is 4,294,967,295, which translates into a capacity of 2.199 TB by using 512 bytes of sectors. Thus any capacity over 2.2 TB also leads to the 2TB barrier and cannot be addressed.
To make more bits available for addressing, the storage device must be initialized by using GPT, which allows up to 64 bits of information to be used in logical sectors, and translates to a theoretical limit of 9.4 ZB. To reboot from a device initialized with GPT, your system must be UEFI capable. This way even if your current partition scheme is MBR, you can convert it to GPT to break the 2TB barrier.
After learning two possible reasons for the 2TB backup limitation for WSB, you could consider fixing it based on them. We summarize the following ideas, select the one you think it's easy:
>> If your 2TB backup limit is caused by VHD, you could consider:
>> If your 2TB barrier is caused by the MBR partition scheme, try to initialize the disk to GPT or convert MBR to GPT. Please go to Method 4. If your system is earlier systems, upgrade to new server will be a better choice.
>> If you find a Windows Server Backup alternative to backup volume larger than 2TB, try Wbadmin or third-party backup software. Note it's not suggested to use Wbadmin unless you are familiar with it, since any small error may result in data loss.
Then, let's start to fix the greater than 2TB limit or directly backup volume larger than 2TB with the following methods:
As mentioned before, Windows 8 + and Windows Server 2012 + can open and manipulate VHDX files natively, which can break the limitations caused by VHD format. Besides, early versions like Windows Server 2003, 2003 R2 and Windows XP don't support UEFI, and therefore cannot boot from a GPT disk to break the 2TB limitation. You can click to check more requirements information.
Anyway, in these situations, it's necessary to upgrade to a new server or clean install Windows Server 2012, 2016, 2019, 2022, etc. Since the latest operating system has higher system requirements, you cannot directly upgrade Windows Server 2008 to 2019 or 2022. Please refer to the following upgrade rules and you may need to upgrade drivers, hard drive, etc to fit on the newer system.
To upgrade Windows Server, you need to prepare for the following things:
For detailed steps, please check: Windows Server in-place upgrade vs clean install. Honestly, the most simple way is to clean install if you use an aging systems like Windows Server 2003.
In Windows Server 2008, you are only allowed to select volumes smaller than 2TB into the backup due to the VHD limit. But you still can use the “Custom” backup configuration to include files or folders equal to or larger than 2TB. The process is very similar, you just need to use a different backup configuration.
Open the backup wizard by clicking Backup Once or Backup Schedule, click Next and select Custom, choose all the items on the volume that is large than 2TB, where to save them, and click Backup to backup data volume larger than 2TB.
The actual data stored in a volume of more than 2TB may not be that large. You can try shrinking the volume in Disk Management to make it smaller than 2T so that it doesn't break the limit and can run normally.
Click Server Manager > Tools > Computer Management > Storage > Disk Management to open disk management. Right-click the volume greater than 2TB and select Shrink volume, enter the amount of space to shrink in MB, confirm it, and click Shrink to make the volume smaller than 2TB.
If you use a newer system, but still receive the Windows Server Backup greater than 2TB error, you need to initialize the disk with GUID Partition Table (GPT). If you have previously initialized it to MBR, you can choose to convert MBR to GPT to make the operating system fully support storage devices that have capacities that exceed 2TB. And it requires UEFI firmware instead of BIOS.
To initialize disk:
Open disk management, right-click the disk that shows Not Initialized, select Initialize Disk, confirm the disk you want to initialize and select partition style (MBR or GPT), click OK to start this process. Note if the disk is offline, you need to make it online before initializing.
To convert MBR to GPT:
Open disk management, right-click MBR disk greater than 2TB, select Convert to GPT Disk, then just wait until the process completes. The MBR disk will be converted to GPT disk.
If you are a professional and want to directly backup files or folders larger than 2TB, try wbadmin command line. It's used to backup larger amounts of files and folders in a large volume.
Step 1. Right-click “Start” and select “Command Prompt (Admin)”.
Step 2. Type the following commands and hit “Enter” to execute. Assuming that the over 2TB volume to be backed up is F: drive and you want to backup it to an external hard drive with a drive letter G.
and then,
Usually, a third-party tool is much easier and allows you to backup volumes large data with fewer obstacles. For the best server backup and restore software, AOMEI Backupper Server is worth mentioning. Below are the reasons why I said this:
To backup Windows Volume over 2TB, use the following steps:
Step 1. Download, install and open AOMEI Backupper Server. For unlimited PCs or servers, try the AOMEI Backupper TechPlus edition. On the main page, click “Backup” and “System Backup” subsequently.
Step 2. By default, this software will select system partition and boot-related partition to avoid unnecessary system failure due to missing system reserved partition or similar. Click the inverted triangle and select a backup destination larger than 2TB. Any location that is available in File explorer can be set as the destination location.
Step 3. Click the “Schedule Backup” and set settings as you like. To set backup methods or delete old backups, click "Backup Scheme" at the lower location. Then, click “Start Backup” to get the backup started.
Daily/weekly/monthly: These backup settings help you backup your system regularly, including the latest updates, newly installed apps, modified files etc. Also, you can enable Wake the computer to run scheduled tasks during the off-peak hours.
Event triggers: To backup system without any interference, you could use "System Shutdown" in event trigger backup.
USB Plug in: It's a plug-and-pull backup method to backup computer to USB flash drive automatically when detected, with no human intervention.
Now you may already fix Windows Server Backup greater than 2TB with above methods and have a system backup in hand. The simple way is to use Windows Server Backup alternative - Wbadmin or AOMEI Backupper. The third-party software is more powerful, which allows you to restore Windows Server to new hardware with the help of its Universal Restore feature.
To perform system deployment on multiple computers, you need to use the image deployment software - AOMEI Image Deploy on the technician plus edition of AOMEI Backupper. It still offers unlimited billable technical services to clients and also enables you to copy the installation directory for portable version creation.