Fixed: Windows Server 2022 BSOD error in 2024 (7 Ways)

What is BSOD?

The Blue Screen of Death (BSOD) is a warning that appears when your computer encounters a critical issue, forcing it to interrupt operations and display a blue screen. Officially known as a "Stop error," this warning signals a problem that requires Windows to reboot. Before restarting, Windows typically saves a "minidump" file containing data about the error.

Over the years, the BSOD has evolved. In the past, it presented a long series of text, sometimes intelligible or unintelligible. With Windows 8, it became more user-friendly, featuring a simple message accompanied by a sad emoticon. In Windows 11, the BSOD is predominantly black, except for a blue QR code, while the message generally conveys the same critical information. However, with the wide use of Windows Server, some users also reported ‘Windows Server 2022 BSOD’ error. We found 2 cases on the search page as follows:

Case 1. Update issue: Windows server 2022 21h2 blue screen after installing KB5030216

Case 2: Windows Server 2022 Blue Screen INACCESSIBLE_BOOT_DEVICE

Actually, the reasons caused Windows Server blue screen are various, let’s have a quick look before troubleshooting it:

☪ Application incompatibility issues
☪ Memory stick incompatibility/corruption or poor contact
☪ Hardware failure
☪ MBR (Master Boot Record) or system file error
☪ Driver issues
☪ Virus or malware attack
☪ BCD errors

If you are tired of the Windows Server 2019/2022 blue screen issue, then please try the below several methods!

How to perform Server blue screen troubleshooting

There are 7 ways to fix Server blue screen. Before you attempt way 2 - way 7, please start your server computer in safe mode to avoid potential issues when resolving the black screen of death error.

👉 Way 1. Remove Any Additional Hardware
👉 Way 2. Run Memory Diagnostics Tool
👉 Way 3. Scan PC for virus or malware
👉 Way 4. Update System Drivers
👉 Way 5. Run SFC scan
👉 Way 6. Rebuild Master Boot Record
👉 Way 7. Perform system restore

Boot Server 2022 in Safe Mode:

Step 1. Turn off your system and then turn it on.

Step 2. As your system starts booting, force it to shut down twice more to enter WinRE (Windows Recovery Environment).

Step 3. Click on Advanced options > Troubleshoot > Advanced options > Startup Settings.

Step 4. Click Restart, and once the system reboots, press F4 to enable safe mode.

By following these steps, you can exclude potential issues related to external hardware and troubleshoot the BSOD error in a safer environment.

Way 1. Remove Any Additional Hardware

Sometimes, the BSOD issue on your PC may be triggered by external hardware. Your computer might not function correctly when certain peripherals are connected. If you encounter a computer crash, consider disconnecting external devices such as external hard drives, Bluetooth mice, keyboards, and USB devices.

Way 2. Run Memory Diagnostics Tool

The Memory Diagnostic Tool is a valuable resource for identifying and correcting software or hardware-related problems, particularly those related to memory function. To check if the BSOD is occurring due to memory, motherboard, or hardware failure, follow these steps:

Step 1. While your PC is in safe mode, press Win+R to open the RUN dialog box, and then type mdsched.exe and press Enter to access the Memory Diagnostic Tool.

Step 2. Click on Restart now and check for problems to begin testing for RAM errors.

Step 3. Your system will reboot, and a diagnostic test will start, revealing any errors in your memory.

Step 4. Once the test is complete, restart your PC. Check if the problem is resolved. If significant RAM issues are detected, consider replacing the memory.

By employing the Memory Diagnostic Tool, you can identify and address potential memory-related issues contributing to the BSOD error.

Way 3. Scan PC for virus or malware

Step 1. Open the Start menu. Type Windows Security into the search field and press Enter to get access to Windows Security.

Step 2. Click on the Virus & threat protection option.

Step 3. Choose to perform a Full scan. Then click Scan now to start the scanning process.

By following these steps, you can use Windows Security to perform a comprehensive scan, helping to identify and address potential threats on your computer.

Way 4. Update System Drivers

Your computer relies on driver software to function properly with installed hardware. Outdated or incompatible drivers can lead to system malfunctions. Follow these steps to ensure your drivers are up to date:

Step 1. Press Win+X to open a dialog box. From the result list to choose Device Manager.

Step 2. If you see a yellow triangle icon beside any entry, it indicates a potential driver issue. Right-click on these entries and select Update Driver.

Step 3. Click on Search automatically for drivers to allow Windows to install necessary updates.

By performing these steps, you can keep your drivers current, promoting a smoothly operating system without compatibility issues.

Way 5. Run SFC scan

Using an SFC (System File Checker) scanner is an effective method to address memory problems and other system errors. Here's how to perform this operation:

Step 1. Press Win+R to open the Run box. And then cmd and hit Enter.

Step 2. Right-click on the Command Prompt option, and select Run as Administrator.

Step 3. In the elevated Command Prompt, type SFC /scannow and press Enter. The scan will run, detecting and fixing errors in your system.

By following these steps, you can utilize the SFC scanner to identify and rectify memory issues and other errors within your system.

Way 6. Rebuild Master Boot Record

Step 1. Insert the Windows Server 2022 installation disk or USB into your PC. Restart your PC and boot from the disk or USB. Click Repair your computer at the Install now screen.

Step 2. Select Troubleshoot -> Advanced options -> Command Prompt.

Step 3. In the Command Prompt, enter the following commands one by one, pressing Enter after each:

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

Step 4. Remove the installation media. And restart the computer to check if the repair was successful.

Way 7. Perform system restore

If the Blue Screen problem persists despite trying the above solutions, consider restoring your system to a previous date. Follow these detailed steps:

Step 1. Click on Start > Search. Type System Restore and select Create a Restore Point.

Step 2. In the pop-up window, click on System Restore. Select a date to which you want to revert your system.

Step 3. Click on Finish to confirm your chosen restore point.

After the restoration is complete, check if the blue screen problem is resolved. By following these steps, you can use System Restore to revert your system to a previous state and potentially eliminate the persistent Blue Screen issue.

Best Practice: Always Backup Your Hard Drives for Disaster Recovery

When faced with the Inaccessible Boot Device error on Windows Server 2019, prompt resolution is crucial to avoid disruptions. Incorrect troubleshooting attempts may risk disk damage and data loss. To mitigate this risk, it is highly recommended to use AOMEI Backupper Server for daily disk backup during regular usage. This proactive approach helps ensure data safety and facilitates efficient recovery from potential system errors.

• This software lets you create disk backup images on Server 2022/2019/2016/2012/2008 to external hard drive, local drive, NAS device, network location, cloud, etc.
• Also, it provides System Backup to take a server backup easily, as well as File Backup to backup individual files and folders hassle-free.
• Its Schedule Backup allows you to backup data in daily, weekly, monthly, event triggers, or USB plug-in frequency.
• By default, it uses incremental backup to save only changed or newly added data in a scheduled task.

Now download AOMEI Backupper Server on your computer.

AOMEI Backupper

Best Windows Server backup software.

Download Free Trial
Windows Servers and PCs

Step 1. Open AOMEI Backupper Standard, navigate to the Backup tab, and select Disk Backup.

Step 2. In the Disk Backup window, click on the Add Disk button to choose the source disk you want.

Step 3. Modify the destination path for the disk backup as needed.

Step 4. Tap Start Backup to Start the disk backup process.

☎Tips:
To avoid backup disk full issues, leverage the Automatic Backup Cleanup function within the Backup Scheme. This feature automates the removal of older backup images, optimizing disk space.
In cases of data loss or disk damage, AOMEI Backupper's Disk Restore function swiftly restores all data from the previous disk, ensuring a rapid and comprehensive recovery process.

🔥Bonus: How to Fix the Blue Screen Caused by CrowdStrike Issue

Microsoft has identified an issue impacting Windows endpoints that are running the CrowdStrike Falcon agent. These endpoints might encounter error messages 0x50 or 0x7E on a blue screen and experience a continual restarting state. If you encounter this error on your physical server, follow the instructions below to fix it.

1. Navigate to Virtual Media in the Remote Console section of the management console.

2. Locate the option for mounting an ISO or inserting virtual media. This option might be labeled as Virtual Media, Virtual DVD, or so on.

3. Select the option to mount or attach an ISO image. You will be prompted to browse for the ISO file on your local system.

4. Browse and select the ISO file which is of the same version as the affected server version.

5. Confirm the selection and wait for the management console to upload and mount the ISO to the server.

6. Once the ISO is mounted, open the server’s operating system or management interface.

7. On the Choose an option screen, select Troubleshoot > Advanced options > Command Prompt.

8. If your system drive is different than C:\, type C: and then press Enter. This will switch you to the C:\ drive.

9. Type in the following commands and then press Enter after each to locate the file matching “C-00000291*.sys” and permanently delete the file(s) found:

• CD C:\Windows\System32\drivers\CrowdStrike
• dir C-00000291*.sys
• del C-00000291*.sys

10. Restart your device.

👉For more details, please visit this page from Microsoft.

Conclusion

This page introduces 7 proven methods on how to fix Windows Server 2022 BSOD errors. Besides, it offers an easy-to-use backup tool that can help you backup hard drive, system, files, etc. on the Server system. With this tool, you can get back lost data easily by restoring backup files when accidents happen.